Key takeaways
- This keyword research checklist has 12 steps, in order: goal and seeds, country, report, top opportunities, intent, difficulty band, the search results page, keyword groups, mapping to existing pages, value, brief, and publish and track.
- Decide what a page should achieve before you look at a single keyword. The goal filters the list for you.
- Search intent decides the page type: a guide, a comparison or a product or service page. Get it wrong and the best keyword is wasted.
- One page per keyword group, and one group per page. Check your existing pages first, or you will end up competing with yourself.
- Keyword research ends with a brief and a date, not a spreadsheet. Then you check where the page ranks.
Keyword research often stops too early. Someone runs a free keyword research tool, sorts the list by search volume and starts writing for the top line. The list is the middle of the job, not the end. This keyword research checklist covers the whole route, from one seed keyword to a content plan with pages, briefs and dates.
I have worked in SEO and digital marketing for more than 16 years, and the steps below are the order I follow myself. Print the checklist box and tick the steps off as you go. If you are new to the topic, our explainer on choosing seed keywords is a good place to start.
The keyword research checklist: 12 steps at a glance
Keyword research checklist (print this)
- Write down the goal of the page or site section, then list three to five seed keywords.
- Choose the one country your customers search from.
- Run a keyword report for your best seed keyword.
- Start with the top opportunities: high volume, low difficulty.
- Read the search intent of every keyword you keep.
- Keep the difficulty band your site can compete in.
- Check the search results page yourself.
- Group keywords that one page can answer.
- Map each group to an existing page or a new one.
- Prioritise the groups by value.
- Write a brief for each page.
- Publish, then track rankings and Search Console data.
Each step depends on the one before. Repeat steps 3 to 7 for a second seed keyword if you need to, but do not start writing before step 9.
Steps 1 to 3: goal, seed keywords, country and report
Step 1. Write down the goal, then the seed keywords
One sentence is enough: “We want more enquiries for our garden design service” or “We want readers for our guides on home brewing”. The goal tells you which keywords to keep later.
Then list three to five seed keywords: the short words or phrases your customers would type, in their words, not your internal jargon. Google’s own SEO starter guide puts it simply: “Think about the words that a user might search for to find a piece of your content.” It also notes that users who know a lot about a topic “might use different keywords in their search queries”. List both.
Step 2. Choose one country
Searches, competition and click prices differ between markets, so research one country at a time. If you sell in the UK, research the UK, even if the rest of the world uses similar words.
Step 3. Run a keyword report for your best seed
Take the seed keyword closest to your goal and run a report. In SeedLens, our free tool, you enter one seed keyword, pick the United States, United Kingdom, Canada or Australia, and download a PDF with the seed keyword and up to 99 searches that contain it. Each row has Google search volume, cost per click, search intent, keyword difficulty and a 12-month trend.
Be clear about the limits: one free report per month, one seed and one country per report, and no spreadsheet export. Choose the seed carefully before you spend your report on it.
Steps 4 to 6: opportunities, intent and difficulty
Step 4. Start with the top opportunities
Do not read a long list from the top by volume. Start with the keywords that combine decent volume and low difficulty. A SeedLens report opens with its 10 best opportunities for exactly this reason: its own Opportunity score puts keywords with high search volume and low difficulty first. Our guide to high search volume, low competition keywords explains how to judge that balance by hand too.
Cross out anything that does not serve the goal from step 1, however tempting the volume.
Step 5. Read the search intent
Intent tells you what kind of page the searcher expects. A good page of the wrong type rarely ranks for long. Here is how I translate the four intent labels into page types:
| Intent | What the searcher wants | Page to plan |
|---|---|---|
| Informational | To learn or understand something | A guide or how-to article |
| Commercial | To compare options before buying | A comparison or “best” page |
| Transactional | To buy, book or order | A product, service or category page |
| Navigational | To reach a specific site or brand | Usually none, unless it is your own brand |
For more on matching pages to intent, see our post on aligning content with Google search intent.
Step 6. Keep the difficulty band your site can compete in
Keyword difficulty is a score from 0 to 100 for how hard it is to reach the top 10 Google results for a keyword. Higher is harder. SeedLens uses four plain bands:
| Band | Score | What it means |
|---|---|---|
| Easy | 0 to 29 | A new or small site can compete with one good page |
| Medium | 30 to 49 | Needs a strong page and a few links from other sites |
| Hard | 50 to 69 | Expect established sites on the first page |
| Very hard | 70 to 100 | Held by big brands, a long-term target |
A new site starts with Easy and Medium keywords and moves to Hard ones later.
Step 7: check the search results page yourself
No score replaces ten minutes in Google. Search each keyword you keep and ask three questions about the first page:
- What type of page ranks? If the top results are all product pages, a guide is likely to struggle, and the other way round.
- Who ranks? A first page full of big brands tells you more than any number. Smaller sites and forums on page one are a good sign.
- What else is on the page? Ads, a map, People also ask questions or videos all take attention away from plain results.
Remember that what you see is not exactly what everyone sees. Google’s Search Console help says: “Search results are specific to the time, place, device, and recent history of the person searching.” Treat your check as a sample, not a measurement.
A keyword list tells you what people type; the results page tells you what Google thinks they meant.
Steps 8 and 9: group keywords into pages and map them
Step 8. Group keywords that one page can answer
Many keywords in a report are variations of the same question. If one page can fully answer two keywords, they belong in one group. In a made-up example, “garden bench with storage” and “storage garden bench” are one group and one page. “How to paint a garden bench” is a different job and a different page.
A simple test: would a reader of the first keyword be happy to land on a page written for the second? If yes, group them. Give each group a main keyword (usually the one with the most searches) and keep the rest as supporting phrases. Our post on the long tail keyword generator shows how long tail variations fit inside a group.
Step 9. Map every group to one page
Before you plan new pages, check your existing ones. If a page already targets a group, improve that page instead of writing a second one. Two pages aiming at the same keyword can compete with each other, which is the classic case of keyword cannibalisation.
Google’s starter guide makes a related, narrower point about duplicate content (the same content at more than one URL): “Search engines choose a single URL (the canonical URL) to show users, per piece of content.” Write one line per group in your plan: group, main keyword, and either an existing URL or “new page”.
Steps 10 and 11: prioritise by value and write the brief
Step 10. Prioritise the groups by value
I order the groups by four things: how close the group is to the goal, its difficulty band, its search volume, and its cost per click. CPC is what advertisers pay for a click: a sign of commercial value, not a promise of revenue.
Take a hypothetical example with round numbers. Group A has 1,000 monthly searches and a CPC of $1. Group B has 200 monthly searches and a CPC of $6. Group A brings more readers; group B’s searchers are worth more to advertisers, and in a service business they may be closer to buying. If both sit in the Easy band, I would often write B first because it serves the goal directly.
Check timing as well. The 12-month trend in a keyword report shows seasonal keywords; publish before the season, not during it. Google Trends helps here too, but read it correctly: its help page says each data point is “divided by the total searches of the geography and time range it represents” and the numbers are “scaled on a range of 0 to 100”. Google Trends shows relative interest, not search counts.
Step 11. Write a brief for each page
The brief turns research into writing. It is also the keyword research template I hand to writers, one per page:
- The goal from step 1 and the reader the page is for.
- The main keyword and the supporting keywords from the group.
- The intent and the page type from step 5.
- What the first page of results covers and misses, including People also ask questions (step 7).
- The internal links in and out, including the existing page it must not compete with.
- A publish date, set by priority and season.
Do not write the brief as a keyword quota. The starter guide warns that “keyword stuffing is against Google’s spam policies”. Use the main keyword naturally and write for the reader.
Step 12: publish, then track rankings and Search Console
Put the briefs in a calendar, publish, then measure with two sources:
- Search Console. The Performance report lets you “learn which queries are bringing traffic to your site”, with clicks, impressions and average position. It shows only queries your site already appears for, so it is the measure after publishing, not a research tool.
- A rank check. A check of your main keywords on Google desktop and mobile shows where each page stands, including keywords that do not yet bring clicks. Our post on how to choose keywords to track explains which ones to include.
Give new pages time, then return to step 4 with the next group.
FAQ
What are the main keyword research steps?
Set a goal and seed keywords, pick a country, run a report, shortlist by opportunity, intent and difficulty, check the results page, group the keywords, map each group to a page, prioritise, write a brief, then publish and track. The checklist box above lists all 12 in order.
How do you do keyword research for a small site?
Start with a narrow goal and specific seed keywords, keep to the Easy and Medium bands, and check the first page of Google before you commit.
Is there a keyword research template I can use?
Use the 12-step checklist as the process and the brief from step 11 as the template, one per page. A one-line plan per keyword group (group, main keyword, page, priority, date) is enough to start.
How long does the keyword research process in SEO take?
The report is quick. Reading, grouping and mapping take longer, depending on how many keywords you keep and how many pages you already have. Steps 7 and 9 take the most time and are worth it.
Can I use a free tool for the whole checklist?
Yes for a small plan. A free keyword report covers steps 3 to 6, Google itself covers step 7, and Search Console covers part of step 12. For a large site with many seed keywords and countries, one free report a month will not be enough.